|
1.
Clean the installation
surface first. Position the spacing tape on the
wall and secure one end with masking tape. Unroll,
level and tape the other end. Spacing tapes show
the general position of each letter only and are
available free upon request.
|
2. Apply
silicone to all of the pads on the first letter.
Position the letter on the wall where indicated
on the spacing tape. Tape the letter to the wall
with several strips of masking tape.
|
3. Continue
with the remainder of the letters, and allow the
silicone to cure for at least 10 minutes before
removing the masking tape.
|
