 |
Plain
Mount is no mounting hardware and Sign Professional
would supply their own. |
| |
|
 |
Flange
Mount is a flat 3/16" to 1/2" perimeter
around the letter into which holes can be drilled
and secured with nails or screws. Not recommended
for letters under 6". |
| |
|
 |
Stud Mount is
a 3/16"diameter 10-24 stud coming out the back.
You can request spacers to allow your letter to stand
off the mounting surface. We would need to know how
much of a standoff you would like. Pattern Needed! |
| |
|
 |
Pad Mount is a
clear plastic pad in which you apply clear silicone
adhesive and tape the letter up (6-12 hours) until
the silicone has a chance to dry. |
| |
|
 |
Combination Mount
is a stud going through a pad on the top half
of the letter and a pad mount on the bottom half.
You would drill a 1/4" diam. hole to accommodate
the stud. Fill hole with silicone and silicone the
pad to the surface. Pattern Needed! |
| |
|
 |
Combination All Mount
is a stud going through a pad on all locations. You
would drill a 1/4" diam. hole to accommodate the
stud. Fill hole with silicone Pattern Needed! |
| |
|
 |
Wire Mount is
a stainless steel hooks inserted into plastic blocks
glued to the inside of the letter. Available for flush
mounting or with a standoff. Only available on flat
face letters 6" or larger. |
| |
|
 |
Outside Bracket
is an L-shaped plastic projection flared outward from
the back of the letter. Brackets on letters over 18"
will be shipped unattached. |
| |
|
 |
Foam Filled letters
are filled with rigid urethane foam and cut flush
to the back edge of the letter. Available only for
letters 9" and smaller. |
| |
|
 |
Free Standing
letters have 90° mounting brackets for installing
on roofs. Other angles available upon request. Price
is 3 times the "No Mounting Hardware" column. |